Bostik Born2Bond Ultra – Cynoacrylate Adhesive

Born2Bond™ Ultra adhesives are low-odor, low-blooming, instant adhesives with a range of viscosities, specially designed for bonding most substrates including plastics, rubbers and metals.

Bostik Born2Bond Ultra – Cynoacrylate Adhesive

Born2BondTM Ultra adhesives are low-odor, low-blooming, instant adhesives with a range of viscosities, specially designed for bonding most substrates including plastics and rubbers.

The formulation consistency has been designed for high bond strength, even in places that are subject to flexing. Careful selection of the formulation ingredients ensures that the product does not stain areas close to the adhesive joint.

Key features

  • Fixture time: 10 seconds
  • High bonding strength
  • Long open time
  • Low blooming
  • Less brittle than conventional instant adhesives
  • Bonds a large range of materials, including polystyrene
  • Transparent and easy to use

Directions for use

  1.  Before applying Born2Bond Ultra, make sure the surface is clean, dry and grease-free.
  2. Apply adhesive to one surface. Do not use items like tissues or a brush to spread the adhesive.
  3. Assemble the parts within a few seconds. The parts should be accurately positioned, as the short fixture time leaves little opportunity for adjustment.
  4. Bonds should be fixed or clamped until the adhesive has reached the fixture.
    • The product should be allowed to develop to full strength before subjecting it to any service loads (typically 24 to 72 hours after assembly, depending on the bond gap, materials and ambient conditions).

Applications

Typical applications for this product are leather and rubber bonding, shoe assembly, automotive aftermarket applications, speaker assembly, and car wheel bonding.

Storage / Shelf life

Optimal storage: 2°C to 8°C (35.6°F to 46.4°F). Storage below 2°C (35.6°F) or greater than 8°C (46.4°F) can adversely affect the product’s properties. If stored properly, this product has a shelf life of 12 months from the packaging date.

Health /Safety

The Safety Data Sheet is available on the Bostik website and should be consulted for proper handling, cleanup and spill containment before use. Keep containers covered to minimize contamination.

Limitations

This product is not recommended for use in pure oxygen and/or oxygen-rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. Material removed from containers may be contaminated during use. Do not return product to the original container. Bostik will not assume responsibility for product that has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or customer service representative.

TDS / MSDS

To request any type of technical sheet or safety sheet.

Product Categories

TDS / MSDS

To request any type of technical sheet or safety sheet.

Can't find the right product?

Talk to a Technical Representative

Need advice?

Our technical team can provide assistance on your industrial product or application needs. Please complete the enquiry form below and we will contact you within 24-48 hours.

Request a quote

Please send us your request to receive a customised offer, either for specific products or special requirements.

Technical Data sheet and safety data sheet

Please fill in the form to receive the .pdf document.